Monday, March 16, 2015

Creating Custom Plank Wood Wall Art for Your Home

Never underestimate the power of scraps. I was able to create the most awesome custom wood wall art for my nursery for super cheap. It was time consuming but easy. You don't need to be handy or crafty to tackle this project.

Here is what you will need:

Wood planks (I used scraps I had from a previous project)
Some tools (saw or circular saw, hammer and nails or drill and screws)
Sand paper (I used my orbital sander)
Wood stain
Natural bristle brush
Scrap cloth
Acrylic or other decorative paint
Small detail paint brush
Computer and Printer
Pencil
Pencil Sharpener
Hooks and picture wire (if you plan on hanging your piece)  



So, I enlisted my hubby to assist in the assembling of my board. He took the scraps from above and cut them in half with his circular saw. He trimmed up the edges so they would all be around them same length, but I wanted it to look pretty rustic so the edges don't line up perfectly. To attach the planks together he used three thin scraps on the back and hammered them into each plank. You could also use screws and a drill. Just make sure your screws or nails are short enough that they aren't going to pop through the front of your board.

Once it was assembled, my next step was to sand. Again, I was going for a rustic look so I lightly sanded with a medium grit sandpaper in 150. I wanted to keep all the dings, cuts and glue on the sides (remember I am using scrap wood) to give it some character. I used my Dewalt orbital sander that you have heard me rave about before, but you can also use a little elbow grease and a plain piece of sandpaper. If you are a DIY maven like me, it is worth the $50 to invest in this sander. It makes projects so much easier. After sanding, make sure to wipe it down with a cloth to remove all the dust before staining.

This was my first time working with stain, and it was a lot less intimidating than I thought it would be. I watched a couple of YouTube videos from Minwax and jumped right in. For my first coat, I used Minwax Interior Wood Stain in Special Walnut. I simply followed the directions on the can by applying it with a natural bristle brush designed for applying stain, let it set for about 5 minutes and then wiped it down with a cloth to remove the excess stain. Here is what it looked like once I was finished. 

After, I let this dry for six hours, I decided to do a second coat with Minwax Interior Stain in Weathered Oak to tone down the walnut color and give it a more aged, barn wood look. I applied this stain the same way as above but let it set for 20 minutes before I wiped it down with my cloth. I know you can't see a huge difference in these pics since they were taken in a shop room with no windows, but trust me the effect I achieved is worth this second step.

Since this will be hanging on a wall inside, I decided not to varnish it. Again, going for rustic here. I am applying a verse to my board for my gender neutral nursery I have been working on, but you could literally put anything on here you want from a phrase to an image. Use your computer to create your art or sketch it out yourself. I just created mine in Pages on my Mac using one of my favorite fonts, American Typewriter. 

Once you have your image all set flip it over and rub pencil over the area you will be tracing. Don't be shy. Really slap that lead on there.


Next, place it back on your board with some tape and trace the outline. Again, use a heavy hand.


Look at this magic. Your image should now be visible on your board. 


Now, you can fill it in anyway you want. I used a can of my Americana Decor® Chalky Finish Paint in Lace and Serene because I had it on hand, but you could any type of craft paint that works on wood.

I just love the finished product. I will be hanging this on the wall in my nursery, so I plan on attaching some hooks and picture wire to the back that I picked up at Hobby Lobby. But I think it looks great propped up on a dresser or shelf as well. Here is what I used on the back of mine.
Ook D Ring
Ook Hanging Wire (50lb. support)

I can't believe how inexpensive it was to create this custom wall art for my nursery. I had most of the items on hand, and the only thing I spent any real money on was the stain. Overall, I think I spent around $15 for my supplies. Stay tuned to see a pic of this project in its true home when I give you a tour of my nursery next week.

Disclaimer: This post contains affiliates links. I may receive a small commission from products you purchase after clicking on its associated link.

4 comments:

  1. This is wonderful. I've been mulling over how to present Prov. 3:21 to our son turning 17 in a month. This post has inspired me to try it! God bless you as you bless others!

    ReplyDelete
  2. Advertising is your main tool to have the business ready to go. Actually, everybody is busy in their company marketing over the World Wide Web. Unfortunately, online company is scammed with scammers. On occasion the provider hires you freelance, or occasionally it is a site designer which orders the copy google At an identical time, if you decide on the most suitable company having excellent reviews and reputation, you will enjoy well composed works.
    http://google.com/

    ReplyDelete
  3. I loved the idea. It's quite easy to realize and it doesn't need a lot of different tools to complete it. And it looks nice too. A bit retro, but still very stylish. And you can write whatever you want to on in. Not a Iwriteessays.com review, of course, but any phrase you want.

    ReplyDelete
  4. Obviously, the ordinance in this beach town insists on gray, wooden signs, and they do look very attractive. Wooden Bar Sign

    ReplyDelete

09 10